What Is IPX8 Waterproof Testing?

What IPX8 Means

IPX8 is a water ingress protection rating under the IP code system. The “8” level indicates protection against continuous immersion in water under conditions specified by the manufacturer.

IPX8 is higher than IPX7, but it is not a single fixed test condition. The required water depth, duration and product condition should be agreed by the manufacturer and customer according to the product specification.

How the Test Is Performed

An IPX8 test generally involves immersing the product in water for a specified depth and duration. The test setup should record water depth, temperature, immersion time and the condition of the sample.

Depending on the product requirement, the sample may be tested in an off state or in a simulated use condition. The test plan should clearly define which condition applies.

After immersion, the product is removed, dried and inspected for water ingress. Functional checks may be performed immediately or after a defined recovery period.

What to Check After the Test

Water resistance is not only about visible water inside the housing. The evaluation should include:

  • Visual inspection for water droplets or condensation
  • Audio output and microphone performance
  • Charging and battery function
  • Bluetooth connection and control response
  • Internal PCBA inspection where required

For audio products, sound quality after water exposure is especially important because water can affect the acoustic mesh, speaker chamber or microphone opening.

IPX8 vs IPX7

IPX7 generally covers temporary immersion under defined conditions. IPX8 covers continuous immersion under conditions specified by the manufacturer.

For IPX8 products, the test report should clearly show the agreed depth, duration and acceptance criteria. A product should not be described as IPX8 without a defined test condition.

Common Water Ingress Points

Typical risk areas include:

  • Housing joints and seams
  • Button openings
  • Charging ports
  • Microphone and speaker openings
  • Acoustic mesh and sealing materials
  • Cable exits and connector covers

The mechanical design and assembly process must control these areas consistently.

Design Measures for IPX8 Products

IPX8 water resistance usually depends on a combination of mechanical sealing and process control. Common measures include gaskets, sealed housing joints, waterproof mesh, internal sealing structures and PCBA nano coating.

Every measure must match the product structure and intended use. A coating alone cannot compensate for a poorly sealed housing.

Production Consistency

A prototype passing an IPX8 test does not guarantee that every production unit will pass. The manufacturing process should control gasket placement, screw torque, ultrasonic welding, adhesive dispensing and housing fit.

Routine leak testing or sample-based water testing can help monitor production consistency.

Why Buyers Should Request Test Evidence

Buyers should ask for the test method, water depth, immersion duration, sample condition, inspection criteria and post-test functional results. A clear test report is more useful than a simple statement that a product is “waterproof.”

Heliance supports IPX8-rated waterproof audio product manufacturing with controlled assembly, testing and quality documentation. Contact us to discuss your IPX8 product requirements.